LABORATORY WATER BATH

TM-205 SEROLOGICAL LABORATORY WATER BATH

Double wall construction, inner being made out of highly polished
thick stainless steel and outer made out of mild steel sheet finished
in powder coating paint or staple mat colour combinations. The
bath is provided with a drain cock to easily drain out the water
and clean the chamber when required.
Temp. range 5⁰C ambient to 80⁰C with Accuracy ±0.5⁰C to 1⁰C
is controlled by capillary thermostat regulated by a graduated knob
on the panel.

Chamber sizes in mms (stainless Steel)
i) 300x175x175 (12"x7"x7")
ii) 300x250x175 (12"x10"7")
iii) 375x300x175 (15"x12"7")
iv) 450x300x175 (18"x12"x7")
v) 600x300x175 (24"x12"x7")

Options:
a) Stirring arrangement with S.S. rod & blades
b) Digital Temperature Indicator -cum-controller

TM-206 LABORATORY WATER BATH RECTANGULAR (THERMOSTATIC CONTROL)

Double wall construction, inner being made out of highly polished
thick stainless steel and outer made out of mild steel sheet finished
in powder coating paint or staple mat colour combinations. Top
cover with 75mm (3") holes with concentric rings.

Temp. range 5⁰C ambient to 95⁰C with Accuracy ±1⁰C is
controlled by capillary thermostat.

Models:
i) 5 holes
ii) 6 holes
iii) 12 holes